An Install Racing Harness can help improve driver safety and provide a more secure seating position. However, many car enthusiasts are hesitant to install a harness because they don’t have a roll bar or roll cage installed in their vehicle. In this article, we’ll provide a step-by-step guide for installing a racing harness without a bar.
Step 1: Choose Your Harness
Before you begin the installation process, you’ll need to choose a harness that is suitable for your vehicle and your specific needs. Make sure to choose a harness that meets all safety regulations and is compatible with your vehicle’s seat belts and mounting points.
Step 2: Remove Your Stock Seat Belt
To install a racing harness, you’ll need to remove your stock seat belt. This can usually be done by removing a few bolts or screws that hold the seat belt in place. Make sure to keep the stock hardware, as you may need it for the installation of your new harness.
Step 3: Install the Shoulder Straps
Start by installing the shoulder straps of your new harness. These should be attached to the vehicle’s mounting points, which are typically located on the rear deck or B-pillar. Make sure to tighten the straps securely, but not so tight that they restrict your movement or breathing.
Step 4: Install the Lap Belts
Next, install the lap belts of your new harness. These should be mounted to the vehicle’s factory mounting points or to a harness bar if you have one installed. If you don’t have a harness bar, you can use a bolt-in harness mount, which can be installed using the stock hardware from your old seat belt.
Step 5: Adjust the Harness
Once you have installed both the shoulder straps and lap belts, adjust the harness to fit your body. The harness should be snug, but not so tight that it restricts your movement or breathing. Make sure that the harness is properly aligned and that the shoulder straps are not twisted.
Step 6: Test the Harness
After installing and adjusting your new harness, it’s important to test it out to ensure that it is working properly. Buckle yourself in and simulate the motions that you would experience while driving. This will help you determine if the harness is too tight or too loose and if it is properly aligned.
Do you need a harness bar for a racing harness?
A harness bar is not strictly necessary for installing a racing harness, but it can provide additional safety benefits. A harness bar is a metal bar that is mounted behind the seats of a vehicle, and it provides a sturdy anchor point for the shoulder straps of a harness. By attaching the shoulder straps to a harness bar, you can ensure that they are properly aligned and do not interfere with the driver’s head or neck in the event of an accident.
However, if a harness bar is not available or not feasible to install, a racing harness can still be installed using the vehicle’s factory mounting points or a bolt-in harness mount. It’s important to choose a harness that meets all safety regulations and is compatible with your vehicle’s seat belts and mounting points, regardless of whether or not a harness bar is used.
How do you put a racing harness on a seat?
Putting a racing harness on a seat can be a straightforward process, but it’s important to follow the proper steps to ensure that the harness is installed safely and effectively. Here are the general steps for putting a racing harness on a seat:
- Choose the right harness: Make sure to choose a racing harness that is compatible with your seat and vehicle. Check that the harness is the right size for you and meets all safety regulations.
- Remove the old seat belt: Before installing the harness, remove the old seat belt from the seat. This can typically be done by unbolting or unscrewing the seat belt from the seat.
- Mount the harness: The harness will usually come with mounting points or attachments that need to be secured to the seat. Follow the manufacturer’s instructions for mounting the harness to the seat, ensuring that the attachment points are properly aligned and tightened securely.
- Adjust the harness: Once the harness is installed, adjust the straps to fit your body. Make sure that the harness is snug but not too tight, and that the shoulder straps are properly aligned.
- Test the harness: Before hitting the track, test the harness to ensure that it is installed properly and is functioning correctly. Buckle yourself in and simulate the movements that you would experience while driving to ensure that the harness is comfortable and secure.
How do you put a harness on a roll cage?
Putting a harness on a roll cage can be a slightly different process than putting it on a seat, but the basic steps are similar. Here are the general steps for putting a harness on a roll cage:
- Choose the right harness: Make sure to choose a racing harness that is compatible with your roll cage and meets all safety regulations.
- Locate the mounting points: Most roll cages will have specific mounting points for a harness. Locate these points and ensure that they are sturdy and securely mounted to the roll cage.
- Mount the harness: The harness will usually come with mounting points or attachments that need to be secured to the roll cage. Follow the manufacturer’s instructions for mounting the harness to the roll cage, ensuring that the attachment points are properly aligned and tightened securely.
- Adjust the harness: Once the harness is installed, adjust the straps to fit your body. Make sure that the harness is snug but not too tight, and that the shoulder straps are properly aligned.
Conclusion
Installing a racing harness without a bar can be a challenging process, but it’s not impossible. By following the steps outlined in this guide, you can install a racing harness that will provide improved safety and a more secure seating position. It’s important to choose a harness that meets all safety regulations and is compatible with your vehicle’s seat belts and mounting points. If you have any questions or concerns about the installation process, it’s best to consult with a professional mechanic or racing expert to ensure that the job is done correctly.
